PREDICTING FECAL COLIFORM BACTERIA LEVELS IN THE CHARLES RIVER,MASSACHUSETTS, USA1

In Massachusetts, the Charles River Watershed Association conducts a regular water quality monitoring and public notification program in the Charles River Basin during the recreational season to inform users of the river's health. This program has relied on laboratory analyses of river samples for fecal coliform bacteria levels, however, results are not available until at least 24 hours after sampling. To avoid the need for laboratory analyses, ordinary least squares (OLS) and logistic regression models were developed to predict fecal coliform bacteria concentrations and the probabilities of exceeding the Massachusetts secondary contact recreation standard for bacteria based on meteorological conditions and streamflow. The OLS models resulted in adjusted R²s ranging from 50 to 60 percent. An uncertainty analysis reveals that of the total variability of fecal coliform bacteria concentrations, 45 percent is explained by the OLS regression model, 15 percent is explained by both measurement and space sampling error, and 40 percent is explained by time sampling error. Higher accuracy in future bacteria forecasting models would likely result from reductions in laboratory measurement errors and improved sampling designs.     

On measuring wealth: a case study on the state of Queensland

In order for policy makers to plan effectively for sustainable development, there is a need for measures of welfare that consider changes in the natural capital stock. Current measures based on conventional national accounting are flawed because they are based solely on flow measures and do not account for environmental effects. In this paper, we use an expanded measure of wealth to estimate the value of natural capital for Queensland. The state's stock of natural capital is valued at A dollar 355.6 billion, of which non-timber forest resources account for 45.3%, ecosystem services 20.0%, and mineral resources 17.6%. This figure is a conservative estimate of the true value since some significant components such as the ecological and life-support functions of the environment are excluded. The estimates highlight the relative importance of different forms of natural capital and can be used to draw the attention of policymakers to the need to give adequate weight to the value of such services in decision-making processes.     

Institutional challenges of adopting ecosystem-based adaptation to climate change

In view of past environmental degradation and anticipated climate change impacts, we assessed the potential for ecosystem-based adaptation in the Murray-Darling Basin, Australia. In a workshop with staff from three Catchment Management Authorities (CMAs) who had jurisdiction over three sub-basins, as well as technical experts, nine adaptation options were identified that ranged from environmental flows, restoring river channel habitat, reoperating infrastructure and controlling invasive species. A Catchment Adaptation Framework was developed and used to assess and compare these adaptation options with each of the CMAs, drawing on interviews with their key stakeholders, to identify the risks, benefits and costs. We found that ecosystem-based adaptation can augment catchment management programs and requires investment in a suite of different but complementary measures to lower risk. Our research found institutional challenges in implementing this approach, including the complexities of multi-agency management, constricting legal requirements, narrow funding arrangements, under-developed institutional capacity, difficulties of implementing catchment-scale programs on private property and the need to adhere to community expectations. These institutional issues are ubiquitous internationally and point to the wider issues of providing sufficient management capacity to support adaptation. The Catchment Adaptation Framework presented here enables river basin managers to systematically assess the adaptation options to better inform their decision-making.     

LC-MS/MS determination of pesticide residues in fruits and vegetables

The aim of the research is to evaluate pesticide residue contamination of fresh and frozen fruits and vegetables, agricultural raw material, purchased from Polish farmers for production of frozen fruits and vegetables, and the estimation of the multiresidue method effectiveness expressed as the proportion of pesticides detected in food samples to the total number of pesticides analyzed by multiresidue methods. A total of 144 samples (of black currants, red currants, raspberries, cherries, strawberries, blackberries, cauliflowers and broccoli) were analyzed using LC-MS/MS method for the determination of 60 pesticides. QuEChERS extraction, matrix-matched calibration and dynamic multiple reaction monitoring method were used. Residues of 15 compounds, mainly fungicides and insecticides, were detected in 46 samples. The percentage of samples with residues above the maximum residue levels (MRL) was 15%, whereas samples with residues below MRL were 17%. A total of 13 samples contained more than one pesticide residue. Pesticide residues were detected most often in samples of black currants (50%), broccoli (36.4%), raspberries (29%) and red currants (21.8%). The most frequently detected pesticides were carbendazim and acetamiprid. The proportion of pesticides detected during our study to the total number of analyzed pesticides amounted to 25%. It was compared to literature findings. For three fourth of multiresidue methods, the proportion was below 50% for methods developed for the analysis of less than 100 pesticides, and below 30% for methods developed for the analysis of more than 100 pesticides. It appears that a lot of efforts and means is lost on pesticides never or rarely detected in examined samples. The workload and cost effectiveness of the development and application of multiresidue methods along with the range of pesticides covered by the method should be carefully and thoroughly considered anytime when a new method or workflow is developed. Including non-targeted screenings in pesticide residue control seems to be an alternative worth considering.     

Metal uptake capacity of modified Saccharomyces pastorianus biomass from different types of solution

In this paper, we investigate the effect of different biomass pretreatments on metal ion uptake by various biosorbents. Heat-treated as well as caustic-treated and ground biomass of Saccharomyces pastorianus was used to remove copper, lead and cadmium from various solutions. Untreated yeast was used as the control sample. The effect of yeast modification on sorption capacity depended on the different types of heavy metal ions and whether they were in single- or multi-component solutions. The highest uptake of copper and lead from a single-metal solution was obtained from heat-treated cells. Ground biomass was the most efficient at cadmium removal. However, the sorption capacity of the modified biomass did not improve when metal ions were removed from multi-component solutions. Indeed, the results in this paper show that optimizing metal removal from single-cation solutions can lead to decreased sorption capacity in multi-component solutions. Therefore, while adjusting the procedure of biomass modification, not only the nature of the metal ion being sorbed but also the chemical composition of the metal ion solution should be taken into account.     

Conditions for the development of anaerobic digestion technologies using the organic fraction of municipal solid waste: perspectives for Poland

This article outlines problems related to the location of facilities designed to treat the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion (AD) facilities are investigated as a treatment option, while taking into account the aspects of renewable energy generation. This research has been spurred on by the relationship between waste management, energy generation issues and spatial planning procedures. The analysis is focused on urban and semi-urban areas of medium and large cities. One of the most difficult issues associated with siting of waste processing plants is its integration with local infrastructures, avoiding conflicts and negative environmental impacts at the same time. This research aims to analyse possible locations for AD plants fuelled by OFMSW in Poland. Based on the experience gained from other countries and lessons learnt from the analysis of existing facilities in Europe, conditions for the location of this type of waste treatment plants have been defined, with the focus on economic, environmental and social issues. Most likely, the results of the multicriteria decision analysis for siting of municipal solid waste AD plants (M-BIST tool) could be transferred to other countries, especially those with a comparable GDP level and a similar framework for a waste management system.     

Renewable energy sources: conflicts and opportunities in a changing landscape

Regional Environmental Change - Replacement of conventional energy sources with renewables such as solar panels and wind turbines requires adequate land. Impact assessments should be conducted to...     

Voice,power, and history: ensuring social justice for all stakeholders in water decision-making

Public participation in water decision-making is an accepted and expected practice. It is expected to lead to better decisions and ensure fairness by satisfying peoples' understanding of democracy and their “right” to participate in decisions that affect them. However, despite years of experience and “best practices”, governing bodies at all levels struggle to implement successful, genuine participation that leads to fair decisions. Ultimately, decision-making about natural resources such as water is a process that takes place in a wider power context where some groups have greater access to sources of power and entitlements. This research applies a “Social Justice Framework” (SJF) to examine the experiences of different stakeholder groups in making their voices heard during water reform processes in the Murray–Darling Basin in Australia. The experiences of croppers and graziers in two different floodplains show how historical advantages and disadvantages affect the power balance between different stakeholder groups and their ability to participate in and influence water decision-making. Applying the three components of the SJF, distributive, procedural and interactive justice, in water decision-making should lead to greater equity in distribution and underline the importance of good governance in decision-making processes.     

Occurrence and distribution of trifluralin,ethalfluralin, and pendimethalin in soils used for long-term intensive cotton cultivation in central Greece

In the present study, a soil monitoring program was undertaken in Greek cotton cultivated areas in 2012. Twenty-seven soil samples were collected from the entire Thessaly plain in early summer of 2012, corresponding to approximately three months (current use of pendimethalin), up to one year (for the banned ethalfluralin), and three years (for the also banned trifluralin), after the last dinitroaniline application. Low but not negligible levels of dinitroanilines were detected, ranging from 0.01 to 0.21 μg g^?1 d.w. for trifluralin and 0.01–0.048 μg g^?1 d.w. for pendimethalin, respectively. Trifluralin was the herbicide most frequently detected (44.4%). The high historic application of trifluralin and its high persistence and accumulation potential is in line with the abundance of the detected residues. The present data indicate that soil samples contain extractable residues of banned trifluralin, but based on the comparison of the theoretical PECplateau for trifluralin (0.277 µg g^?1) and the maximum Measured Environmental Concentration, it was concluded that the detected residues should be attributed to previous years’ application. The latter suggested the need for continual monitoring of the dinitroaniline family of pesticides, including the banned substances, aiming thus to an improved environmental profile for agricultural areas.     

Recycling of high purity selenium from CIGS solar cell waste materials

Copper indium gallium diselenide (CIGS) is a promising material in thin film solar cell production. To make CIGS solar cells more competitive, both economically and environmentally, in comparison to other energy sources, methods for recycling are needed. In addition to the generally high price of the material, significant amounts of the metals are lost in the manufacturing process. The feasibility of recycling selenium from CIGS through oxidation at elevated temperatures was therefore examined. During oxidation gaseous selenium dioxide was formed and could be separated from the other elements, which remained in solid state. Upon cooling, the selenium dioxide sublimes and can be collected as crystals. After oxidation for 1 h at 800 °C all of the selenium was separated from the CIGS material. Two different reduction methods for reduction of the selenium dioxide to selenium were tested. In the first reduction method an organic molecule was used as the reducing agent in a Riley reaction. In the second reduction method sulphur dioxide gas was used. Both methods resulted in high purity selenium. This proves that the studied selenium separation method could be the first step in a recycling process aimed at the complete separation and recovery of high purity elements from CIGS.